BCX Client Policy

From BCX Media Wiki
Revision as of 15:13, 15 July 2020 by DavidB (talk | contribs)
Jump to navigation Jump to search


This section needs a re-write on completion of development:


The Client Policy Settings allow you make global changes to existing client policies

To view/change Client Policy Settings, click File - Tool - Client Policy. From here you are able to change the Default Client Policy or create new policies.


Needs images of all new tabs with explainations

bcx client policy general.png Image of client policy general tab


bcx client policy features.png Image of client policy features tab


Enable Pre Logon UI – When checked this will allow pre logon messages to be displayed.

Show Package Task Deployment – When checked the BCX Client will display packages installing.

Show Network Status – When checked the network status check is performed on startup, and will display the working offline message if relevant.

Enable Managed Wallpaper - When checked this stops users choosing their own wallpaper

Default package task timeout period – The amount of time to wait for a package task exit gracefully. If 90 minutes has passed BCX will assume the package task has failed, kill the process and will mark as timeout. We would only recommend changing this if there is a specific reason to, after consultation with a BCX engineer.


bcx client policy rebuild.png Image of client policy rebuild tab


WDS Server - The Server that the BCX WDS Server Connector was configured on.

WDS Buildname - As defined when configuring the BCX WDS Server Connector.

WDS Primary Disk - Change this if your stations primary disk is not 0.

WDS Partition Size - You can increase the extracted boot.wim partition size from 900MB here.

WDS Partition Drive - If driver letter B: is in use on your stations, the temporary boot partition drive can be changed here.


bcx client policy advanced.png Image of client policy advanced tab



Return to Contents page